Daniel N. Steinberger

708 S. Gilbert Street

Ada, OH 45810

Phone/FAX: (419) 634-1765

 

OBJECTIVE: Technical Writer

 

SUMMARY: Technical Writer: Hands-on experience with military and commercial aircraft and land vehicles specializing in (but not limited to) Service Bulletins, Service Instructions, Service Letters, Preventive Maintenance (emphasis on Repair Level Analysis, RCM [Reliability Centered Maintenance], and Life Cycle Cost), O & M [Operation and Maintenance Manuals] (emphasis on description, installation, maintenance, and operation), overhaul manuals, MIL-STD-1388-2B (emphasis on LSA-036 DCN), Supply Chain functions, spares modeling, repair management process, MIL-STD-1388, GEIA-STD 0007, H Sheets,  SMR Codes, IPLs, Windows-based IPLs, IT, IS, AMM, CMM, RPSTL [MIL-STD-335], IPB, [on the commercial side of the house:] IPC [for ATA 100 (Chapters 29, 36, 24), and iSpec2100], BOM, MAC, DMWR, NDT, Spares Engineering, avionics, Airworthiness Directives, FAA Regulations

 

Experience and proficiency with Microsoft Word, Excel spreadsheets, PowerPoint, MS Project, Windows 7 and 10, MS Office Suite, SGML, IETMs (using S1000D, MIL-STD-40051, MIL-STD-2361C, XML, ArborText, FrameMaker), Cloud, SharePoint, SAP [emphasis on developing and maintaining SAP interfaces with non-SAP software], Pro E, Adobe Acrobat, Adobe Illustrator, Visio, RoboHelp, CATIA, Quicksilver, Interleaf, SLICWave 5.2, ICAPS, Haystack, UNIX, performance-based training, CBT modules, web-based design, e-books, e-Learning, SolidEdge, and other desktop publishing and graphics editing software

 

Familiar with Army CECOM Life Cycle Management Command (CECOM LCMC) [emphasis on [but not limited to] Engineering and Manufacturing Development, Production and Deployment, and Operations and Support], MIL-PRF-49506, GEIA-STD-0007, ANSI/GEIA-STD-0007, GEIA-HB-0007-1, LTID, CAGE Codes, SAS Appendix A, SAS and LMI Data Products, DD Form 1423 and DIDs (including [but not limited to] DI-ALSS-81529 [LMI Data Product], DI-ALSS-81530 [LMI Summaries]), and twin-engine all weather tactical-fighter aircraft including (but not limited to) differences and comparison between F-14 and F-15

 

Exposed to, acquainted with, and comfortable with CPL modules, requirements and guidelines, Microsoft SharePoint, Arena Simulation Software (emphasis on Manufacturing Simulation, Packaging Simulation, Process Reengineering Simulation, and Packaging Templates), DITA, SiberSafe [XML] CMS [MIL-STD-]40051/2361 configurations, and [to a lesser degree] tested CECOM Web Compose Tool (WCT) [to integrate with Oxygen XML Editor]. Also [familiar with] TRADOC documentation, MIL-STD- 785B, MIL-STD 2173, and other aspects of mechanical reliability,

and reliability engineering, design, and analysis

 

EXPERIENCE

2001 to 2015

State of Ohio Department of Education, Columbus, OH

Substitute Teacher [on an as-need basis] (responsibilities include Guest Speaker and expanded to Course Development Specialist: Most related experience includes joint effort with GE (Cincinnati, OH), and Wright-Patterson Air Force Base regarding the following: using Microsoft Word, PowerPoint, Excel spreadsheets, XML, and ArborText Adept Editor, combine Writing Better Technical Articles, and Creating Technical Manuals [in accordance with MIL-M-38784C, and MIL-STD 1388-2B] with actual hands-on training to monitor and document training manuals on military aircraft engines.  Also teach blueprint reading, CATIA, SAP functionality, and How to Read an SGML Document. 

 

[While working for Department of Education as Substitute Teacher/Course Development Specialist]

 

Concurrent on-site employment at [including (but not limited to) Defense Support Systems (2014-2015), Entegee (2014), EASI (2014), Oxford International (2013), etc.]:

 

2012 – 2013

Boeing, Ridley Park, PA

Using REDARS/EID, Teamcenter, Simplified English, ArborText 1.6 and 1.8, S1000D 4.0, iSpec2100, SAP Report Writer, Acrobat 10.0, Microsoft Office Suite, MHLH Tech Manual Data Base, EBOM, IETP System PDFs, and IETM (IADS) XML, create and blend graphics and text into IPCs.  Working closely with SAP Systems Integration Analysts, using query report writer, SAP ABAP, and SAP Workflow, assist in design, implementation, and development of SAP interfaces with non-SAP software.  [On the LSA side of the house: use MIL-STD-1388-2A, SLICWave 5.2, MIL-STD 1552, PPL, PLISN, etc., to assist landing gear [hydraulic, pneumatic] provisioning planning process.]  Also write DMs, and assist in troubleshooting, wiring Diagrams, FTPs, Fault Isolation, D&O, R&I, Parts List, etc.  Also build CGM file, and search for drawings and report missing images. 

 

2009 – 2012

Eclipse Aerospace, Albuquerque, NM

To better acquaint myself with skill sets that lend themselves to current aerospace industry standards [following a layoff]: in a SAP environment, use ERP applications (e.g., SAP R/3, Oracle eBusiness Suite), SharePoint, ATA 100 (predominantly Chapters 29 and 36), to write AMMs, CMMs, maintenance manuals, and IPCs.  [On the LSA side of the house, use SLICWave 5.2, SMR Codes, H Sheets, Microsoft, Excel, and toggle between MIL-STD-1388 and GEIA-STD 0007, to manage spares and generate documentation for related Supply Chain functions including (but not limited to) provisioning documentation, spares modeling, and repair management process for various aircraft.]

2008 – 2009

BAE, Nashua, NH

Using S1000D, iSpec 2200, ATA 100, and MIL-STD-335, write, update, edit, and revise Service Bulletins, programming manuals, preventive maintenance procedures, RPSTL, and generate LSA tasks for electronic warfare systems.

2005 – 2008

Triumph Gear Systems, Park City, UT

Using Microsoft Word, Excel, XML Editor and other XML-based technologies, write maintenance manuals, provide responses to fleet maintenance issues, develop Inspection Work Cards and generate Maintenance Requirement Cards.

 

2004 – 2005

Northrop Grumman, St. Augustine, FL

Using ArborText and FrameMaker 6.0, convert Interleaf to Word to edit, update and revise legacy maintenance manuals ("I", "O", and "D" level). [On the LSA side of the house (in an LTID environment)] act as Interim Master Scheduler using Primavera, and generate various Tasks, including life cycle cost analysis using SLIC/2B and SLICWave.

 

2002 – 2004

Allison Engine, Indianapolis, IN

In accordance with NAVSEA [and other Navy Specs], write IPB for the AG9130 Ship Services Gas Turbine Generator and [on the LSA/H Sheet side of the house] feed the following reports: LSA-009, -010, and -016]

 

2001 to 2002

General Dynamics Land Systems, Woodbridge, VA

Technical Writer: Provide life cycle cost analysis, and, using MS Word, Excel, AIMSS [Advanced Infantry Marksmanship Strategies and Standards], and other web-based tools, to write, edit, revise, update, maintain, and illustrate maintenance manuals (with emphasis on diagnostic capability from fault detection through repair verification) for the Army's Advanced Amphibious Assault Vehicle (AAAV).  Upon request (using Supplementary Provisioning Documentation (SPTD)) prepare initial provisioning list, and research parts information.

 

2001 to 2001

Northrop Grumman, Columbus, OH

Technical Writer: Using MS Word, Excel spreadsheets, PowerPoint, Adobe Acrobat, ArborText, and Adobe Illustrator, write, update and maintain State of Ohio Multi-Agency Radio Communications (MARCS) Systems Manual, Concept of Operation (CONOPS), and operational specifications. Organize and manage IETMs to support IPC and WDM.

 

2000 to 2001

International Truck and Engine, Springfield, OH

Technical Writer: Using MS Word, PageMaker, Acrobat, and FrameMaker + SGML 6.0, write computer manufacturing processes for NGV (Next Generation Vehicle). Maintain Intranet files and write software documentation manuals to update, edit, and maintain assembly/disassembly procedures on the NGV. Also editor and liaison to network administrators.

 

1996 to 2000

Pemco, Denver, CO

Technical Writer/LSA: Using Word, ArborText, Pro E, Interleaf, PowerPoint, and Excel spreadsheets create, revise and illustrate Service bulletins, Service Instructions, maintenance manuals, and other large-scale commercial and military aircraft documents in accordance with (but not limited to) MIL-STD 1388-1A and MIL-STD 1388-2B. Conduct a Logistics Support Analysis program to include accomplishment of Tasks 101, 102, 103, 201, 301, 303, 401, and 501of MIL-STD- 1388-1A for cargo door handling systems.

 

1993 to 1996

Lockheed-Martin, Marietta, GA

LSA/Technical Writer: Generate Performance Based Supportability reports and assist in providing Integrated Logistics Support Plans. Write Lockheed Automated Wiring Systems (LAWS) to instruct CATIA users. Organize and manage IETMs to support

C-130J and YF-22. Edit, troubleshoot, and write maintenance manuals.

 

1987 to 1993

Sikorsky Aircraft, Bridgeport, CT

Technical Writer/LSA: Create and blend graphics and text into maintenance manuals, CMMs, and IPBs. Edit IETMs using Xyvision's PDM (Parlance Document Manager) and logical SGML-coded fragments to demonstrate how AMTOSS coded information can be exchanged between different companies and documents. Edit overhaul manuals and perform logistics support analysis for Blackhawk and Apache helicopters using MIL-STD-1388-1A, -2A/2B, SLIC 4.6, PartsMaster, Haystack, and ICAPS.

 

1984 to 1987

Northrop Grumman, Bethpage, NY

Technical Writer: Write, illustrate, update, modify, edit, and proof maintenance manuals and IPBs for F-14D/A-6F and JointSTARS in accordance with MIL-M- 38784 and MIL-M-81929.

 

1976 to 1984

Bell Communications Research, Inc., S. Plainfield, NJ

Technical Editor: Edit, revise, and illustrate for plug-in control systems (PICS) systems, and other [Unix-based] telephony-related materials.

 

EMPLOYMENT:

SCHOOL YEARS

Rutgers Army ROTC, Fort Bragg, NC

Welder: Heat treat and parts fabrication.

General Dynamics, Lima, OH

General Maintenance: Assist welders with heat treat and parts fabrication for battle turret and turret bustle ammunition stowage rack.

 

WRSU-88.7 FM, New Brunswick, NJ

Broadcast Technician: Engineering, operations and procedure, maintenance.

 

EDUCATION

1994

Graduated: WPAFB Air Force Acquisition Logistics Center, Dayton, OH

Plan, organize, direct, and monitor an LSA effort during weapon system development, and modification.

 

1976

Graduated: Rutgers University, New Brunswick, NJ

Bachelor of Arts summa cum laude in English, minors in electrical engineering and computer science. Baccalaureate underwritten by Vertical Flight Foundation Scholarships.

 

LICENSE

1984

FCC First Class Radio Telephone License and Radar Endorsement

 

OTHER

1984

Author: 500 page book on Basic Electronics

 

CLEARANCE

Confidential

 

AVAILABILITY

Immediate